Cryogenic Cuvettes
Cuvettes for use in extremely low temperatures spectroscopy applications. Extra quartz fusing allows for structural integrity deep into the low Kelvins.
Type 64 Cryogenic Cuvette with PTFE Cover (Lightpath: 10mm)
Type 64 Cryogenic Cuvette with PTFE Cover (Lightpath: 10mm)
FireflySci's cryogenic cuvettes allow you to dip well into the low kelvins. This standard model contains a PTFE cover and contains a fortified, extra-fused design to protect it against extremely low temperatures.
Features of FireflySci Type 64 Cryogenic Spectrophotometer Cuvette:
- Highly accurate results, only need to test sample once.
- Premium quality: Firefly cuvettes are made with the best quality quartz and glass material available. Excellent transmission values.
- Made by hand, ensuring high quality optical polishing with no defects.
- Each cell goes through a vigorous inspection process before leaving our factory.
- Fire-fused to ensure that cuvettes are robust and durable.
- Comes in several different materials: (UV Quartz & IR Quartz)
- Available in 10mm lightpath.
- Two windows optically polished.
- All joints are excessively fused to round corners and provide additional strength to the walls.
- Includes PTFE cover.
Please note: cryogenic cells should be cooled down gradually. They need to cool down for at least an hour to ensure the cell will not break. The same applies for increasing the temperature.
Lightpath | Top | Outer Length | Outer Width | Outer Height | Inner Length | Inner Width | Capacity |
---|---|---|---|---|---|---|---|
10mm | PTFE Cover | 12.5mm | 12.5mm | 45.0mm | 10.0mm | 10.0mm | 3.500ml |
Fill your cuvettes faster with these great 3ML transfer pipettes.
Pipettes come in 10 pieces per bag.
Made from polypropelyne.
Best gloves for handling your cuvettes and calibration standards.
Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!
A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.
Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.
Covers for various Firefly spectrophotometer and fluorometer cuvettes
P67 Stirring Rod for manual stirring of a sample in a 10mm cuvette. Made from polyethylene.
Cuvette Add-a-mixer: Manual mixer fits any standard 10mm path length quartz or glass cell with a 4mm inside width or larger
This PTFE magnetic centrifugal stirrer fits into a standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine.
Stirs cell contents while measuring absorbance or fluorescence. Fits all standard spectrophotometers and fluorometers with a 10mm cuvette holder.
Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.
Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc
Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell
Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells
Learn some cool quartz cuvette tips and tricks that will save you time with your experiments.
A fast and easy way to clean your cuvettes.
These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved.