Water Jacketed Cuvettes
These fluorometer cuvettes are designed with an additional chamber surrounding the sample chamber through which liquids can be circulated to control the temperature. A water jacket, if you will!
Type 54FL Water Jacketed Fluorescence Cell with Front-Facing Tubes and PTFE Stopper (Lightpath: 10mm)
![54FLUV10.jpg](https://images.squarespace-cdn.com/content/v1/5411d5c0e4b02e1c8b27565a/1438204484089-CQYTJRHAZFVE403O2B9R/54FLUV10.jpg)
![54FLUV10.jpg](https://images.squarespace-cdn.com/content/v1/5411d5c0e4b02e1c8b27565a/1438204484089-CQYTJRHAZFVE403O2B9R/54FLUV10.jpg)
Type 54FL Water Jacketed Fluorescence Cell with Front-Facing Tubes and PTFE Stopper (Lightpath: 10mm)
Water jacketed fluorescence cell with PTFE stopper and front-facing tubes.
Features of FireflySci Type 54FL Water Jacketed Fluorescence Cell:
- Highly accurate results, only need to test sample once.
- Premium quality: Firefly cuvettes are made with the best quality quartz and glass material available. Excellent transmission values.
- Made by hand, ensuring high quality optical polishing with no defects.
- Each cell goes through a rigorous inspection process before leaving our factory.
- Fire-fused to ensure that cuvettes are robust and durable.
- Available in UV Quartz & IR Quartz
- Available in 10mm lightpath
- Four windows and base optically polished.
- Contains tubes to water jacket. Dimensions: OD4 X ID2 x L10mm
- Outer width is without tubes.
- Outer height is without stopper.
Lightpath | Top | Outer Length | Outer Width | Outer Height | Inner Length | Inner Width | Inner Height | Capacity |
---|---|---|---|---|---|---|---|---|
10mm | PTFE Stopper | 12.5mm | 12.5mm | 48.0mm | 10.0mm | 4.0mm | 36.0mm | 1.200ml |
Best gloves for handling your cuvettes and calibration standards.
Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!
A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.
Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.
PTFE stoppers for various Firefly spectrophotometer and fluorometer cuvettes
Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.
Universal cuvette holder for rectangular and cylindrical cells 1-100mm
Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc
Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell
Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells
Learn what a z-dimension or centre height of a cuvette is and find the correct one for your machine.
Learn some cool quartz cuvette tips and tricks that will save you time with your experiments.
Learn about the cuvette path length and how to determine the light path of any cuvette.
Cell holder rack for 12 standard size cuvettes.