Micro Cuvettes
Spectrophotometer cells with micro capacities (0.350-0.700ml).
Type 18BM Micro Raised-Bottom Black Cuvette with PTFE Cover (Lightpaths: 5-20mm)
Type 18BM Micro Raised-Bottom Black Cuvette with PTFE Cover (Lightpaths: 5-20mm)
FireflySci's Type 18 cuvette with a modified, raised bottom and black walls to further reduce sample volume and block out stray light.
Features of FireflySci Type 18BM Raised-Bottom Micro Spectrophotometer Cuvette:
- Highly accurate results, only need to test sample once.
- Premium quality: Firefly cuvettes are made with the best quality quartz and glass material available. Excellent transmission values.
- Made by hand, ensuring high quality optical polishing with no defects.
- Each cell goes through a rigorous inspection process before leaving our factory.
- Fire-fused to ensure that cuvettes are robust and durable.
- Comes in several different materials: (UV Quartz, IR Quartz)
- Lightpaths from 5-20mm available
- Two windows optically polished.
- The floor of this cuvette is raised 9mm from the bottom.
- Contains black walls for blocking out stray light.
- Includes PTFE cover.
Lightpath | Top | Outer Length | Outer Width | Outer Height | Inner Length | Inner Width | Base Thickness | Capacity |
---|---|---|---|---|---|---|---|---|
5mm | PTFE Cover | 7.5mm | 12.5mm | 45.0mm | 5.0mm | 2.0mm | 9.0mm | 0.280ml |
10mm | PTFE Cover | 12.5mm | 12.5mm | 45.0mm | 10.0mm | 2.0mm | 9.0mm | 0.560ml |
20mm | PTFE Cover | 22.5mm | 12.5mm | 45.0mm | 20.0mm | 2.0mm | 9.0mm | 1.120ml |
Best gloves for handling your cuvettes and calibration standards.
Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!
A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.
Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.
Covers for various Firefly spectrophotometer and fluorometer cuvettes
Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.
Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc
Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell
Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells
Learn what a z-dimension or centre height of a cuvette is and find the correct one for your machine.
Learn some cool quartz cuvette tips and tricks that will save you time with your experiments.
Cuvette spacers for rectangular cells with lightpaths of 1mm, 2mm and 5mm.