Micro Cuvettes
Spectrophotometer cells with micro capacities (0.350-0.700ml).
Type 30BM Micro Raised-Bottom Black Cuvette with PTFE Stopper (Lightpaths: 5-20mm)
Type 30BM Micro Raised-Bottom Black Cuvette with PTFE Stopper (Lightpaths: 5-20mm)
All but identical to the Type 30M micro spectrophotometer cuvette but the floor of the cuvette is raised 9mm.
Features of FireflySci Type 30BM Micro Raised-Bottom Black Spectrophotometer Cuvette:
- Highly accurate results, only need to test sample once.
- Premium quality: Firefly cuvettes are made with the best quality quartz and glass material available. Excellent transmission values.
- Made by hand, ensuring high quality optical polishing with no defects.
- Each cell goes through a vigorous inspection process before leaving our factory.
- Fire-fused to ensure that cuvettes are robust and durable.
- Comes in UV Quartz & IR Quartz
- Available lightpaths range from 5-20mm.
- The floor of this cuvette is raised 9mm from the bottom.
- Two windows optically polished.
- Walls are made from black quartz to block out stray light.
- Includes PTFE stopper.
Lightpath | Top | Outer Length | Outer Width | Outer Height | Inner Length | Inner Width | Base Thickness | Capacity |
---|---|---|---|---|---|---|---|---|
5mm | PTFE Stopper | 7.5mm | 12.5mm | 49.0mm | 5.0mm | 2.0mm | 9.0mm | 0.300ml |
10mm | PTFE Stopper | 12.5mm | 12.5mm | 49.0mm | 10.0mm | 2.0mm | 9.0mm | 0.600ml |
20mm | PTFE Stopper | 22.5mm | 12.5mm | 49.0mm | 20.0mm | 2.0mm | 9.0mm | 1.200ml |
Cuvette spacers for rectangular cells with lightpaths of 1mm, 2mm and 5mm.
Best gloves for handling your cuvettes and calibration standards.
Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!
A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.
Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.
PTFE stoppers for various Firefly spectrophotometer and fluorometer cuvettes
Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.
Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc
Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell
Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells
Learn what a z-dimension or centre height of a cuvette is and find the correct one for your machine.
Learn some cool quartz cuvette tips and tricks that will save you time with your experiments.
A fast and easy way to clean your cuvettes.
These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved.