Tandem/Divided Cuvettes
Cuvettes with multiple chambers for doing simultaneous measurements. These are also known as tandem or "Yankeelov" cuvettes.
Type 25A Tandem Cuvette (Lightpath: 10mm)
![25AUV10.jpg](https://images.squarespace-cdn.com/content/v1/5411d5c0e4b02e1c8b27565a/1426628426352-CRBEZO8HZNDLBDKSFKGN/25AUV10.jpg)
![25AUV10.jpg](https://images.squarespace-cdn.com/content/v1/5411d5c0e4b02e1c8b27565a/1426628426352-CRBEZO8HZNDLBDKSFKGN/25AUV10.jpg)
Type 25A Tandem Cuvette (Lightpath: 10mm)
Spectrophotometer cuvette divided into two chambers so that users can do two simultaneous measurements.
Features of FireflySci Type 25A Tandem Spectrophotometer Cuvette:
- Highly accurate results, only need to test sample once.
- Premium quality: Firefly cuvettes are made with the best quality quartz and glass material available. Excellent transmission values.
- Made by hand, ensuring high quality optical polishing with no defects.
- Each cell goes through a vigorous inspection process before leaving our factory.
- Fire-fused to ensure that cuvettes are robust and durable.
- Comes in several different materials: (UV Quartz & IR Quartz)
- Available in 10mm lightpath
- Two windows & partition optically polished.
- Height of partition is approximately 37mm
- Includes PTFE cover.
Lightpath | Top | Outer Length | Outer Width | Outer Height | Inner Length | Inner Width | Capacity |
---|---|---|---|---|---|---|---|
10mm | PTFE Cover | 12.5mm | 12.5mm | 45.0mm | 2x4.5mm | 10.0mm | 2x1.300ml |
Best gloves for handling your cuvettes and calibration standards.
Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!
A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.
Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.
Covers for various Firefly spectrophotometer and fluorometer cuvettes
Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.
Universal cuvette holder for rectangular and cylindrical cells 1-100mm
Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc
Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell
Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells
Learn what a z-dimension or centre height of a cuvette is and find the correct one for your machine.
Learn some cool quartz cuvette tips and tricks that will save you time with your experiments.
A fast and easy way to clean your cuvettes.
These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved.