A fast and easy way to clean your cuvettes.

These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved. 

Closed 13-425 screw cap (comes with PTFE septa). Comes in both black and white.

Closed 13-425 Mininert screw cap. Enables users to minimize contact with the sample.

PTFE/silicone septa for closed and open screw caps (SC1 and SC2)

Fill your cuvettes faster with these great 3ML transfer pipettes. 

Pipettes come in 10 pieces per bag.

Made from polypropelyne.

Cell holder rack for 12 standard size cuvettes.

Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!

A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.

Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.

P67 Stirring Rod for manual stirring of a sample in a 10mm cuvette. Made from polyethylene.

This PTFE magnetic centrifugal stirrer fits into a standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine.  

Stirs cell contents while measuring absorbance or fluorescence. Fits all standard spectrophotometers and fluorometers with a 10mm cuvette holder.

Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc

Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell

Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells