Cell holder rack for 12 standard size cuvettes.

Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!

A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.

Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.

P67 Stirring Rod for manual stirring of a sample in a 10mm cuvette. Made from polyethylene.

Cuvette Add-a-mixer: Manual mixer fits any standard 10mm path length quartz or glass cell with a 4mm inside width or larger

This PTFE magnetic centrifugal stirrer fits into a standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine.  

Stirs cell contents while measuring absorbance or fluorescence. Fits all standard spectrophotometers and fluorometers with a 10mm cuvette holder.

Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.

Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc

Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell

Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells